Careers

Locations

Promotions

Main Image
Main Image
Schedule A Demo
Trade in Value
Financial Form
Add To Comapare
Print
Share This
Share This

Features

  • Base Equipment
  • Tires Dls 520/85R42 R1
  • Fdr Hse HP (Header Pitch)
  • Hyd Tilt Adjustment
  • CEBIS Mobile Monitor

Specifications

  • CEMOS Auto Cleaning
  • CEMOS Auto Separating
  • CEMOS DIALOG Software
  • GrainMeter Sensor
  • Quantimeter

Other Information

  • CRUISE PILOT Software
  • Lights High-End Pkg 6x
  • Turbo Chop Chopper
  • HD Unloading Auger 4XL-29.2'
  • Auto Crop Flow
  • Central Lubrication system
  • In-cab Rotor Cover Adj
  • Sieve System 3-D
  • 2017 Claas Lexion 740
  • *Fix speed - feederhouse drive 110hp/ 80 kW
  • *HP feederhouse + CAC + feederhouse brake
  • *Dust suction fan - HP feederhouse
  • *CEMOS CRUISE PILOT ready
  • *HP feederhouse + hydraulic tilt
  • *Wide dust shields - HP feederhouse
  • *APS threshing system - small grain
  • *APS threshing cylinder - V-plates kit
  • *APS impeller cylinder - HD wear kit
  • *ROTO PLUS - variable speed drive (400-1000 rpm)
  • *ROTO PLUS - flax rotors + 4D cleaning
  • *JET STREAM cleaning system
  • *Cleaning system - 3D cleaning
  • *Cleaning system - wind reduction kit
  • *CEBIS - GRAINMETER
  • *Small grain sieves - TM 6
  • *Grain tank 330 bu (11
  • 500 l)
  • *Unloading auger 4 XL (29 ft/ 8.8m) + HD
  • *Unloading rate 3.8 bu/sec (130 l/sec)
  • *TURBO CHOP chopper + HD knives + chaff blower
  • *Chaff Blower rubber curtain for TURBO CHOP
  • *Ground drive wheel 19mph/ 30kph
  • *Duals (Goodyear) - 620/70 R42 - R1
  • *2WD + Center-link Axle + Adjustable Rear Axle
  • *Floatation tire - 750/65 R26 - R1 SFT (Mitas)
  • *Ground Drive 19 mph/ 30 kph
  • *Engine 402 hp/300 kW - CAT (C13)
  • *CEBIS - fuel consumption monitoring
  • *Fuel tank - 304 gal./ 1150 l + DEF tank 22gal./80
  • *Machine drive system (L)
  • *Radio
  • *Refrigerator (under instructor`s seat)
  • *Side window blinds (left & right)
  • *CEBIS MOBILE - Monitor
  • *CEBIS - back-up camera
  • *PROFI CAM - camera
  • *PROFI CAM - monitor
  • *Side rail for additional monitors
  • *QUANTIMETER
  • *Printer for CEBIS
  • *Leather covered - operator seat + instructor`s sea
  • *LED high end - work light package + spot lights
  • *CLAAS CAN bus interface
  • *CEMOS DIALOG
  • *CEMOS AUTO CROP FLOW
  • *CEMOS AUTO SEPARATION
  • *CEMOS AUTO CLEANING
  • *CEMOS CRUISE PILOT
  • *CMOTION multi-function lever
  • *Side hill sensor
  • *Central lubrication - 2WD rear axle + chopper
  • *Manual - stationary knives + friction floor adjust
  • *Steering valve
  • *Steering angle sensor
  • *Electric mirror adjustment (left + right)
  • JD Bridge
  • Swath Up 450 SN: 444 40638
  • 1224 ENG 857 SEP as of January 16/2026
  • 1x Set on Smooth APS Grates
  • 1x Set of Keystock Grates
  • ITS Bars
  • Swath Up 450
  • JD 2630 Screen and 3000 Reciever with JD Link Modem
  • ✔ Base Equipment
  • ✔ Tires Dls 520/85R42 R1
  • ✔ Fdr Hse HP (Header Pitch)
  • ✔ Hyd Tilt Adjustment
  • ✔ CEBIS Mobile Monitor
  • ✔ CEMOS Auto Cleaning
  • ✔ CEMOS Auto Separating
  • ✔ CEMOS DIALOG Software
  • ✔ GrainMeter Sensor
  • ✔ Quantimeter
  • ✔ CRUISE PILOT Software
  • ✔ Lights High-End Pkg 6x
  • ✔ Turbo Chop Chopper
  • ✔ HD Unloading Auger 4XL-29.2'
  • ✔ Auto Crop Flow
  • ✔ Central Lubrication system
  • ✔ In-cab Rotor Cover Adj
  • ✔ Sieve System 3-D
  • ✔ 2017 Claas Lexion 740
  • ✔ *Fix speed - feederhouse drive 110hp/ 80 kW
  • ✔ *HP feederhouse + CAC + feederhouse brake
  • ✔ *Dust suction fan - HP feederhouse
  • ✔ *CEMOS CRUISE PILOT ready
  • ✔ *HP feederhouse + hydraulic tilt
  • ✔ *Wide dust shields - HP feederhouse
  • ✔ *APS threshing system - small grain
  • ✔ *APS threshing cylinder - V-plates kit
  • ✔ *APS impeller cylinder - HD wear kit
  • ✔ *ROTO PLUS - variable speed drive (400-1000 rpm)
  • ✔ *ROTO PLUS - flax rotors + 4D cleaning
  • ✔ *JET STREAM cleaning system
  • ✔ *Cleaning system - 3D cleaning
  • ✔ *Cleaning system - wind reduction kit
  • ✔ *CEBIS - GRAINMETER
  • ✔ *Small grain sieves - TM 6
  • ✔ *Grain tank 330 bu (11
  • ✔ 500 l)
  • ✔ *Unloading auger 4 XL (29 ft/ 8.8m) + HD
  • ✔ *Unloading rate 3.8 bu/sec (130 l/sec)
  • ✔ *TURBO CHOP chopper + HD knives + chaff blower
  • ✔ *Chaff Blower rubber curtain for TURBO CHOP
  • ✔ *Ground drive wheel 19mph/ 30kph
  • ✔ *Duals (Goodyear) - 620/70 R42 - R1
  • ✔ *2WD + Center-link Axle + Adjustable Rear Axle
  • ✔ *Floatation tire - 750/65 R26 - R1 SFT (Mitas)
  • ✔ *Ground Drive 19 mph/ 30 kph
  • ✔ *Engine 402 hp/300 kW - CAT (C13)
  • ✔ *CEBIS - fuel consumption monitoring
  • ✔ *Fuel tank - 304 gal./ 1150 l + DEF tank 22gal./80
  • ✔ *Machine drive system (L)
  • ✔ *Radio
  • ✔ *Refrigerator (under instructor`s seat)
  • ✔ *Side window blinds (left & right)
  • ✔ *CEBIS MOBILE - Monitor
  • ✔ *CEBIS - back-up camera
  • ✔ *PROFI CAM - camera
  • ✔ *PROFI CAM - monitor
  • ✔ *Side rail for additional monitors
  • ✔ *QUANTIMETER
  • ✔ *Printer for CEBIS
  • ✔ *Leather covered - operator seat + instructor`s sea
  • ✔ *LED high end - work light package + spot lights
  • ✔ *CLAAS CAN bus interface
  • ✔ *CEMOS DIALOG
  • ✔ *CEMOS AUTO CROP FLOW
  • ✔ *CEMOS AUTO SEPARATION
  • ✔ *CEMOS AUTO CLEANING
  • ✔ *CEMOS CRUISE PILOT
  • ✔ *CMOTION multi-function lever
  • ✔ *Side hill sensor
  • ✔ *Central lubrication - 2WD rear axle + chopper
  • ✔ *Manual - stationary knives + friction floor adjust
  • ✔ *Steering valve
  • ✔ *Steering angle sensor
  • ✔ *Electric mirror adjustment (left + right)
  • ✔ JD Bridge
  • ✔ Swath Up 450 SN: 444 40638
  • ✔ 1224 ENG 857 SEP as of January 16/2026
  • ✔ 1x Set on Smooth APS Grates
  • ✔ 1x Set of Keystock Grates
  • ✔ ITS Bars
  • ✔ Swath Up 450
  • ✔ JD 2630 Screen and 3000 Reciever with JD Link Modem
Contact Information
This equipment has been inspected by an authorized Alberta Ag Centre dealer or service partner and includes additional measures.

Location: COALDALE

Address: 1502 8 St. Coaldale, AB T1M 1M4

Toll-free: 1 (888) 895-0669

Phone or Text: (587) 787-3232

Message to vendor

Name
Step 1 of 2
0 years
1%

2017

CLAAS

740

  • 2017
  • Combine
  • CLAAS
$ 266,900

SPECIFICATONS

Currency : CAD
Price : :266900.00
Status: stock
Location : Coaldale
Stock Number : CB201123
VIN : C7800409
Year : 2017
Model : 740
Make : CLAAS
Meter Type : separator-hours
Meter : 857
Type : Combine
Dealer Id : 1230000001
Engine Hours : 857

Features

  • Base Equipment
  • Tires Dls 520/85R42 R1
  • Fdr Hse HP (Header Pitch)
  • Hyd Tilt Adjustment
  • CEBIS Mobile Monitor

Specifications

  • CEMOS Auto Cleaning
  • CEMOS Auto Separating
  • CEMOS DIALOG Software
  • GrainMeter Sensor
  • Quantimeter

Other Information

  • CRUISE PILOT Software
  • Lights High-End Pkg 6x
  • Turbo Chop Chopper
  • HD Unloading Auger 4XL-29.2'
  • Auto Crop Flow
  • Central Lubrication system
  • In-cab Rotor Cover Adj
  • Sieve System 3-D
  • 2017 Claas Lexion 740
  • *Fix speed - feederhouse drive 110hp/ 80 kW
  • *HP feederhouse + CAC + feederhouse brake
  • *Dust suction fan - HP feederhouse
  • *CEMOS CRUISE PILOT ready
  • *HP feederhouse + hydraulic tilt
  • *Wide dust shields - HP feederhouse
  • *APS threshing system - small grain
  • *APS threshing cylinder - V-plates kit
  • *APS impeller cylinder - HD wear kit
  • *ROTO PLUS - variable speed drive (400-1000 rpm)
  • *ROTO PLUS - flax rotors + 4D cleaning
  • *JET STREAM cleaning system
  • *Cleaning system - 3D cleaning
  • *Cleaning system - wind reduction kit
  • *CEBIS - GRAINMETER
  • *Small grain sieves - TM 6
  • *Grain tank 330 bu (11
  • 500 l)
  • *Unloading auger 4 XL (29 ft/ 8.8m) + HD
  • *Unloading rate 3.8 bu/sec (130 l/sec)
  • *TURBO CHOP chopper + HD knives + chaff blower
  • *Chaff Blower rubber curtain for TURBO CHOP
  • *Ground drive wheel 19mph/ 30kph
  • *Duals (Goodyear) - 620/70 R42 - R1
  • *2WD + Center-link Axle + Adjustable Rear Axle
  • *Floatation tire - 750/65 R26 - R1 SFT (Mitas)
  • *Ground Drive 19 mph/ 30 kph
  • *Engine 402 hp/300 kW - CAT (C13)
  • *CEBIS - fuel consumption monitoring
  • *Fuel tank - 304 gal./ 1150 l + DEF tank 22gal./80
  • *Machine drive system (L)
  • *Radio
  • *Refrigerator (under instructor`s seat)
  • *Side window blinds (left & right)
  • *CEBIS MOBILE - Monitor
  • *CEBIS - back-up camera
  • *PROFI CAM - camera
  • *PROFI CAM - monitor
  • *Side rail for additional monitors
  • *QUANTIMETER
  • *Printer for CEBIS
  • *Leather covered - operator seat + instructor`s sea
  • *LED high end - work light package + spot lights
  • *CLAAS CAN bus interface
  • *CEMOS DIALOG
  • *CEMOS AUTO CROP FLOW
  • *CEMOS AUTO SEPARATION
  • *CEMOS AUTO CLEANING
  • *CEMOS CRUISE PILOT
  • *CMOTION multi-function lever
  • *Side hill sensor
  • *Central lubrication - 2WD rear axle + chopper
  • *Manual - stationary knives + friction floor adjust
  • *Steering valve
  • *Steering angle sensor
  • *Electric mirror adjustment (left + right)
  • JD Bridge
  • Swath Up 450 SN: 444 40638
  • 1224 ENG 857 SEP as of January 16/2026
  • 1x Set on Smooth APS Grates
  • 1x Set of Keystock Grates
  • ITS Bars
  • Swath Up 450
  • JD 2630 Screen and 3000 Reciever with JD Link Modem
  • ✔ Base Equipment
  • ✔ Tires Dls 520/85R42 R1
  • ✔ Fdr Hse HP (Header Pitch)
  • ✔ Hyd Tilt Adjustment
  • ✔ CEBIS Mobile Monitor
  • ✔ CEMOS Auto Cleaning
  • ✔ CEMOS Auto Separating
  • ✔ CEMOS DIALOG Software
  • ✔ GrainMeter Sensor
  • ✔ Quantimeter
  • ✔ CRUISE PILOT Software
  • ✔ Lights High-End Pkg 6x
  • ✔ Turbo Chop Chopper
  • ✔ HD Unloading Auger 4XL-29.2'
  • ✔ Auto Crop Flow
  • ✔ Central Lubrication system
  • ✔ In-cab Rotor Cover Adj
  • ✔ Sieve System 3-D
  • ✔ 2017 Claas Lexion 740
  • ✔ *Fix speed - feederhouse drive 110hp/ 80 kW
  • ✔ *HP feederhouse + CAC + feederhouse brake
  • ✔ *Dust suction fan - HP feederhouse
  • ✔ *CEMOS CRUISE PILOT ready
  • ✔ *HP feederhouse + hydraulic tilt
  • ✔ *Wide dust shields - HP feederhouse
  • ✔ *APS threshing system - small grain
  • ✔ *APS threshing cylinder - V-plates kit
  • ✔ *APS impeller cylinder - HD wear kit
  • ✔ *ROTO PLUS - variable speed drive (400-1000 rpm)
  • ✔ *ROTO PLUS - flax rotors + 4D cleaning
  • ✔ *JET STREAM cleaning system
  • ✔ *Cleaning system - 3D cleaning
  • ✔ *Cleaning system - wind reduction kit
  • ✔ *CEBIS - GRAINMETER
  • ✔ *Small grain sieves - TM 6
  • ✔ *Grain tank 330 bu (11
  • ✔ 500 l)
  • ✔ *Unloading auger 4 XL (29 ft/ 8.8m) + HD
  • ✔ *Unloading rate 3.8 bu/sec (130 l/sec)
  • ✔ *TURBO CHOP chopper + HD knives + chaff blower
  • ✔ *Chaff Blower rubber curtain for TURBO CHOP
  • ✔ *Ground drive wheel 19mph/ 30kph
  • ✔ *Duals (Goodyear) - 620/70 R42 - R1
  • ✔ *2WD + Center-link Axle + Adjustable Rear Axle
  • ✔ *Floatation tire - 750/65 R26 - R1 SFT (Mitas)
  • ✔ *Ground Drive 19 mph/ 30 kph
  • ✔ *Engine 402 hp/300 kW - CAT (C13)
  • ✔ *CEBIS - fuel consumption monitoring
  • ✔ *Fuel tank - 304 gal./ 1150 l + DEF tank 22gal./80
  • ✔ *Machine drive system (L)
  • ✔ *Radio
  • ✔ *Refrigerator (under instructor`s seat)
  • ✔ *Side window blinds (left & right)
  • ✔ *CEBIS MOBILE - Monitor
  • ✔ *CEBIS - back-up camera
  • ✔ *PROFI CAM - camera
  • ✔ *PROFI CAM - monitor
  • ✔ *Side rail for additional monitors
  • ✔ *QUANTIMETER
  • ✔ *Printer for CEBIS
  • ✔ *Leather covered - operator seat + instructor`s sea
  • ✔ *LED high end - work light package + spot lights
  • ✔ *CLAAS CAN bus interface
  • ✔ *CEMOS DIALOG
  • ✔ *CEMOS AUTO CROP FLOW
  • ✔ *CEMOS AUTO SEPARATION
  • ✔ *CEMOS AUTO CLEANING
  • ✔ *CEMOS CRUISE PILOT
  • ✔ *CMOTION multi-function lever
  • ✔ *Side hill sensor
  • ✔ *Central lubrication - 2WD rear axle + chopper
  • ✔ *Manual - stationary knives + friction floor adjust
  • ✔ *Steering valve
  • ✔ *Steering angle sensor
  • ✔ *Electric mirror adjustment (left + right)
  • ✔ JD Bridge
  • ✔ Swath Up 450 SN: 444 40638
  • ✔ 1224 ENG 857 SEP as of January 16/2026
  • ✔ 1x Set on Smooth APS Grates
  • ✔ 1x Set of Keystock Grates
  • ✔ ITS Bars
  • ✔ Swath Up 450
  • ✔ JD 2630 Screen and 3000 Reciever with JD Link Modem
Contact Information
This vehicle has been inspected by an authorized Mercedes-Benz dealer or service partner and includes additional services.

Location: COALDALE

Address: 1502 8 St. Coaldale, AB T1M 1M4

Toll-free: 1 (888) 895-0669

Phone or Text: (587) 787-3232

Message to vendor

Name
Step 1 of 2
0 years
1%

Featured Items

Albertaagcenter

CLAAS

MAXFLEX 930

2016
$30,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

MAXFLEX 930

2017
$32,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

740

2017
$266,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

740

2017
$277,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

XERION 12.65

2023
$744,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

8800TT

2023
$871,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

JAGUAR 960

2023
$742,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

LEXION 7500

2020
$425,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

8600

2022
$589,900
Stock :
Year :
Make :
Location :
Add To Compare
Albertaagcenter

CLAAS

ORBIS 900

2024
$249,900
Stock :
Year :
Make :
Location :
Add To Compare
Compare
Facebook
Twitter
LinkedIn